Note that audio will remain in the powered down state when the power cycle is complete. Performs a warm reboot of the unit (power cycles the unit). Note that audio will be STOPPED when the power cycle is complete. This has the same functionality as “Reset/Initialize” Power cycle the unit for the new default gateway to take effectĬlears the configuration from the unit including any passwords. The unit should respond with a “+OK” when the command is accepted. Retrieves the current default gateway from the unit. Power cycle the unit for the new subnet mask to take effect Retrieves the current subnet mask from the unit. Power cycle the unit for the new IP Address to take effect Retrieves the current IP Address from the unit Any other number indicates the unit is part of a system and has a working configuration. A device ID of 0 indicates that the unit doesn’t have a configuration loaded into it. The commands themselves should not actually include the literal "" text. The commands below use as a placeholder for the Line Feed character. When setting parameters though, using a different device number, although possible (as long as it is a valid Device ID) it is not recommended.Īll of these commands are terminated with a Line Feed character, which in ASCII is represented by a hex 0A. Getting information from another unit in a system is possible by using the appropriate Device ID. This means that commands will be executed only on the unit you are directly connected to. Please note that these commands use 0 as the device ID. These commands can be sent either via Telnet or HyperTerminal. Within the Audia/Nexia text protocol, there are a handful of system commands that allows setting and retrieving IP settings as well as resetting and clearing a unit. Under the Contents tab, explore System Control > RS-232 and Telnet Protocol. A comprehensive look at the RS-232 and Telnet protocol commands is found in both the Audia and Nexia programs under Help > Help Topics.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |